DUO-SAFETY LADDER CORPORATION DUO-SAFETY LADDER CORPORATION
Printer
Friendly

Replacement Parts

Stainless Steel Wear Sleeves

Stainless Steel Wear Sleeve

Stainless Steel Wear Sleeve Rung

Stainless Steel Wear Sleeves were developed to prevent damage and wear to ladder rungs. Sleeves are sold individually and come with two pop rivets. Sleeves should be placed on the rungs as pictured above at wear points. You should not require more than 4 wear sleeves between any two ladders.

Dimensions for the wear sleeve is 1.5" wide and 0.88" high.

If you have any further questions, please call 920-231-2740. See our Price List for current pricing.


Safety Note

All ground ladders shall be service tested per NFPA-1932(current edition), before being put into service for the first time, at least annually, anytime it is suspected as unsafe, subjected to impact, overloading, exposed to direct flame, when a heat label turns dark and always after being repaired unless that repair is only changing out rope/halyard.
Duo-Safety Catalog REQUEST A
CATALOG
Pround Members Of:

Fire Apparatus Manufacturers Association National Fire Protection Association International Fire Service Training Association NY State Association of Fire Chiefs Wisconsin Safety Council

We suggest all Fire Departments refer to both the National Fire Protection Association (N.F.P.A.) and the International Fire Service Training Association (I.F.S.T.A.) for complete and proper practices and usage of Fire Service ladders.

National Fire Protection
Association (N.F.P.A.)

1 Batterymarch Park
Quincy, MA 02169
Phone: 1-800-344-3555
Fax: 1-617-770-0700
www.nfpa.org
International Fire Service
Training Association (I.F.S.T.A.)

930 North Willis
Stillwater, OK 74078
Phone: 1-800-654-4055
Fax: 1-405-744-8204
www.ifsta.org