| Lock Assembly

Duo-Safety Spring Lock Assembly
- Lock housing & cover plate (not shown)
- Lock hook
- Finger (note position)
- Spring
- Mounting bolt holes
- Shoulder bolt hole
All ladder lock assemblies are a two piece aluminum assembly consisting of:
- Lock housing (base plate with mounting bolt holes and cover plate with rung mount.
- Lock hook - solid aluminum hooks that engage rungs.
- Finger - solid aluminum finger - depress the hook to allow disengagement of the rung.
- Spring - stainless steel torsion spring- provides automatic action to assembly.
- Shoulder bolts & nuts, 3 each shoulder bolts & nuts hold the parts in place and hold the cover plate over the base plate.
 Lettered Set A/B Pictured
Note: Base plate assemblies are all the same.
Cover plate assembly includes a welded aluminum tube piece that accepts the lock rung and
rivets. Cover plates are made in 3 different versions.
- A/B (Right & left) used on series 500/525, 1000, 900/925, 1500/1525, YGE-2/YGE-3
- C/D (Right & left) used on 1200/1225
Replacement lock assemblies are sold in pairs only and
include instructions and all mounting fasteners.
Normally you will reuse the old lock rung from the old lock assemblies.
However, if damaged, you must also order a replacement rung and 4 rivets.
Please follow the replacement instructions provided with the replacement locks for proper
installation. Be sure to advise proper lock assembly version/lettered pair required to
ensure proper fit. If you have any further questions, please call 920-231-2740. See our Price List for current pricing.
LOCK HOUSING REPAIR KIT - NEW ALUMINUM LOCKS
Includes all the parts needed to repair a set (2) of our new aluminum locks.
Parts in kit:
- 6 ea. Shoulder bolts
- 4 ea. Large plastic washers
- 4 ea. Small plastic washers
- 2 ea. Lock springs
- 6 ea. 1/4" x 20 hex head lock nuts
- 4 ea. 1/4" x 20 x 3/4" hex head bolts
- 4 ea. 1/4" x 20 regular hex head nuts
- 4 ea. 1/4" lock washers
- 4 ea. 1/4" flat washers
- 4 ea. Stainless steel pop rivets

LOCK HOUSING REPAIR KIT - OLD STEEL LOCKS
Includes all the parts needed to repair a set (2) of our old style steel locks.
Parts in kit:
- 12 ea. Flat spacers
- 4 ea. 9/16" Tube spacers
- 4 ea. 1" Tube spacers
- 4 ea. 1/4" x 20 x 2-1/4" Slotted round head bolts
- 4 ea. 1/4" x 20 x 2-3/4" Slotted flat head bolts
- 2 ea. 1/4" x 20 x 1" Shoulder bolts
- 6 ea. 1/4" x 20 hex head regular nuts
- 2 ea. 1/4" lock washers
- 2 ea. Lock Springs
- 2 ea. 1/2" Tube spacers
- 4 ea. Stainless steel pop rivets
|